Download the latest version of Cisco Packet Tracer that is 8.0 and enjoy the seamless network simulation environment . As this Cisco PT has fixed the bugs found in the previous version like 7.1 and 6.2
This Cisco PT 8.0 required no login so you don’t need to Netacad login as it bypasses the login within a click and this need to done only once , So download the software and follow the instruction carefully.
- Microsoft Windows (7 / 8.1 / 10) or Linux Ubuntu (14.04 64-bits LTS)
- At least Pentium 4 (2.53 GHz). Recommended Pentium 4, 3.0 GHz or better
- A minimum of 2GB RAM (4GB recommended)
- 500 MB of storage space (700 MB recommended)
- A minimum screen resolution of 1024 x 768 (1366x768p recommended)
Download Cisco Packet tracer 8.0 + Crack
You can download the software using below link
|File Name||Cisco PT 8.0.rar|
|File Size||160.61 MB|
|File Scan Status||Safe|
When you finished downloading the software just unzip with winrar or whatever software you have for unzipping .rar files.
Note- Copy the rar password that is thumperdc as while unzipping the archive it will ask for the password so when it asks for the password paste this password and then unzip .If you don't use this password you will not be able to unzip.
Now install the Cisco Packet Tracer 8.0 . And follow the instruction to install it carefully .
Activate the Packet Tracer
When you finished installing the software don't do any thing just close the Cisco packet tracer if you have opened it . Now follow the instruction to proceed …
Step #1 : Disable the Antivirus and MS Defender Realtime Protection
For this if you have any anti virus software installed just turn off the protection of real time for a while and after that turn of the real time protection feature of Microsoft Defender.
Step #2 : Run the Patch
Now run the Patch_x64.exe and then click on the Patch button to remove the login and activate the cisco packet tracer 8.0
Now enjoy the Cisco Packet Tracer 8.0 (latest) without login and keep making the labs.
Note- Keep in mind that every lab that you'll create in CISCO PT 8.0 will run in its later version but not in previous version like 6.2 , 7.0 while CISCO PT 8.0 partially supports all the labs created in the previous version like 6.1
If you are facing any problem just let me know via comment.
Share this article and subscribe to the push notification service which this site asked while load so you can refresh the page so that it can request again .
You may read-
Disclaimer - This article is written for educational purpose only . Any bypass method are illegal and we don't encourage you to do so . For any damage / penalties I'll take no responsibilities.